Sc7 slewing drive with three-phase motor for rotating platforms and spray equipment

High quality SC7 slewing drive bearing swivel drive with three phase motor for rotation platform, spraying equipment and turntableModelSC7Place of OriginChangzhou,ChinaBrandCoresun DriveDelivery Time7 daysMaterial42CrMo,50MnOutput Torque1.03kN.mTilting Moment Torque13.5kN.mHolding Torque10.4kN.mStatic Axial Rating133KNStatic Rad

Featured Products

High quality SC7 slewing drive bearing swivel drive with three phase motor for rotation platform, spraying equipment and turntable

Model

SC7

Place of Origin

Changzhou,China

Brand

Coresun Drive

Delivery Time

7 days

Material

42CrMo,50Mn

Output Torque

1.03kN.m

Tilting Moment Torque

13.5kN.m

Holding Torque

10.4kN.m

Static Axial Rating

133KN

Static Radial Rating

53KN

Dynamic Axial Rating

32KN

Dynamic Radial Rating

28 KN

Gear Ratio

71:1

Efficiency

40%

Three Phase Motor

Yes

HS Code

8483409000

Sc7 Slewing Drive with Three Phase Motor for Rotation Platform and Spraying Equipment
Hourglass worm gear slewing drive slewing bearing is designed with much tooth contact surface between the worm and gear. The slewing bearing is machined by quenching treatment with stronger hardness, abrasive resistance and use life.

Coresun drive manufacturer's rotary drive uses tower-type solar power stations, dish-type Stirling-engine solar power stations and trough-type solar thermal power stations. We have gained a good reputation from customers all over the world. All aspects of engineering control are based on creating a low-cost, reliable solution. Coresun drive adopts hourglass worm technology to provide maximum survivability, load holding ability and improve efficiency and accuracy
 

1)Tilting Moment Torque: Torque is the load multiplied by distance between the position of load and the center of slewing bearing. If the torque generated by load and distance is greater than the rated tilting moment torque, slewing drive will be overturned.

2) Radial load: Load vertical to the axis of slewing bearing

3) Axial load: Load parallel to the axis of slewing bearing

4) Holding torque: It is the reverse torque. When the drive is rotating reversely, and parts are not damaged,

5) The maximum torque achieved is called holding torque.

6) Self-locking: Only when loaded, the slewing drive is not able to reverse rotate and thus called self-locking.

 

Coresun Slewing Drive Introduction

1.Coresun Drive promises to offer the most accurate data by experiment for ensuing the technical parameters meet requirements
2.From the customer's perspective, providing the cost-effective production
3.Coresun design and make various special and non-standard as customers' requirement
4.The key to teamwork is respect for each other. Common development with our customers

Sc7 Slewing Drive with Three Phase Motor for Rotation Platform and Spraying Equipment

Sc7 Slewing Drive with Three Phase Motor for Rotation Platform and Spraying Equipment

Coresun Drive slewing drive SC7 worm shaft,casting housing and slewing bearing machining

Sc7 Slewing Drive with Three Phase Motor for Rotation Platform and Spraying Equipment
Sc7 Slewing Drive with Three Phase Motor for Rotation Platform and Spraying Equipment

CONTACT US

It is sincerely looking forward to cooperating with you for and providing you the best quality product & service with all of our heart!
Sc7 Slewing Drive with Three Phase Motor for Rotation Platform and Spraying Equipment

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours